Defelsko Positest Pull Off Adhesion Tester for Con & Metal

  • Defelsko Positest Pull Off Adhesion Tester for Con & Metal

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624.



Related Products

Olympus 38DL Ultrasonic Thickness Gauge inc. transducers

Olympus 38DL Ultrasonic Thickness Gauge inc. transducers

The Olympus 38DL Ultrasonic Thickness Gauge operates with dual and single element transducers and has a colour transflective VGA screen. Inc..

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Gauge

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Gauge

Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standa..

PCWI 30kV DC Porosity, Holiday  Detector

PCWI 30kV DC Porosity, Holiday Detector

DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit L..

Olympus 27 mg Pocket Thickness Gauge

Olympus 27 mg Pocket Thickness Gauge

Range 1 to 500 mm, fast min mode. Resolution 0.01 mm. Probe operates -20 to 150°C. ..

Tags: concrete, hydraulic pressure, metal, positest, pull off adhesion tester