Fluke 725 NATA Process Calibrator with NATA Certification

  • Fluke 725 NATA Process Calibrator with NATA Certification

DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resistance measurement 0.05%, 11kohm max, source 0.01%, 11kohm max. Frequency measurement 5 counts 1Hz~50kHz, source 1 count 20Hz~5kHz. 'K' thermocouple measurement 0.3ºC, source 0.3ºC. Pt100 RTD measurement 0.5ºC, source 0.2ºC. Measures and simulates 4~20mA, t/c E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs and frequency. Operates from drycell batteries. (Includes NATA calibration - AU).

Related Products

Fluke 789 ProcessMeter

Fluke 789 ProcessMeter

Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250 resistor, 20mA drive into 1,200..

Fluke 726 Process Calibrator

Fluke 726 Process Calibrator

Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..

Fitting Set With 700Bar Hose

Fitting Set With 700Bar Hose

Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..

Emerson 475 HART and FF communicator

Emerson 475 HART and FF communicator

Will configure, test, and diagnose your HART and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. I..

Tags: 725, field calibrator, multifunction process calibrator, nata certification