Blog

In this quick overview of the Crystal XP2i Digital Logging Pressure Gauge 1 bar NATA by TechRentals, see what the powerful unit is capable of. The Pressure Gauge logs actual pressure, average pressure, average pressure with peaks and, on demand.

In this quick overview of the MiniRAE 3000+ PID for VOC Detection by TechRentals, see what this powerful unit is capable of. This PID is for confined space monitoring, with low, high, STEL and TWA Alarms triggering 95dB buzzer and RED LEDs.

In this quick overview of the Megger DLRO10X Microhmmeter by TechRentals, see what the powerful unit is capable of. This Microhmmeter sets the standard for low resistance measurement and is a fully automatic instrument. 

This video demonstrates how to use the Torkel battery tester.

How-to setup the Testo 184 G1 data logger's measurement parameters using the device software. Also includes how to turn the data logger on and off for recording, and preparing the data for reporting.

Equipment available can perform all four types of earth ground measurement; 3 & 4-pole (Fall of Potential) and 4-pole soil resistivity testing (using stakes), Selective testing (using 1 clamp and stake) and Stakeless testing (using 2 clamps only).

The MOM2 is a lightweight (1 kg), handheld Micro-ohmmeter. It measures up to 220 A test current, auto-ranging from 999 μohm to 1000 mohm FS. Rechargable batteries provide 2200 measurements for I min = 50 A, or 800 for I min = 100 A. Memory for 190 recorded measurements, downloadable via Bluetooth with provided software. Kelvin probes included.

An overview on the equipment provided with the Megger Cable Identification Kit. The unit provides reliable cable identification for both energised and non-energised cables. It can generate pulses on cables 440 V 3 phase cables.

Covering the testing options of the Megger Sverker 900E Relay Test Set as well as the inputs and outputs on the interface. Relay test set for 3 phase protective relay equipment. Current ranges to 105 A. ac outputs to 900 V & dc outputs to 900 V. Power Factor and Phase shifting measurements. 4x Voltage and 4x Current generators with 4 binary inputs, 2 binary outputs, and timing measurement. Built-in computer controller for setting up and sequencing tests.

An overview on how-to use the Hioki PW3198 Power Quality Analyser and accessories. The Hioki PW3198 is a premium Power Quality Analyser for demanding applications. The unit includes 3x 1000 A ac CTs, 1x 200 A ac/dc CT and 4x 9667 5000 A flexible CTs. Ideal for ac mains studies as well as solar inverter evaluations. The unit is supplied with Hioki 9624 PQA-HiVIEW Software for detailed data analysis and report generation.

A quick overview of the Flir E60 Thermal Imaging Camera including the supplied equipment, basic functionality and settings. The Flir E60 measures -20 to 650°C, IR and MSX resolution 320 x 240, 60 Hz. NETD 50 mK. 2x and 4x digital zoom. Visual image 3.1 MP, built-in LED lamps, laser locator, scalable IR picture-in-picture. Video recording, touch screen, composite video out, Wi-Fi, and USB. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. Bluetooth support for voice annotations and selected Extech equipment. PC software provided. Mobile app available.

Covers the capacity of the Megger EZ-Thump, how to determine voltage capacity, and various functionality features.

The Megger EZ-Thump 12kV Thumper and TDR Power Cable Fault locator operates off either ac supply or internal batteries. The kit includes the Megger pin-pointer to locate faults when used in thump mode. Internal battery provides 30 min of thumping with a 3 h recharge time. Generates a 500 J 0 to 12 kV @ 12 mA pulse for thumping.