Defelsko Positest Pull Off Adhesion Tester for Con & Metal

  • Defelsko Positest Pull Off Adhesion Tester for Con & Metal

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624.



Related Products

Olympus 38DL Ultrasonic Thickness Gauge inc. transducers

Olympus 38DL Ultrasonic Thickness Gauge inc. transducers

The Olympus 38DL Plus Ultrasonic Thickness Gauge performs non-destructive measurements. This unit is supplied with transducers that can meas..

Mitutoyo SJ-210 Surface Roughness Tester

Mitutoyo SJ-210 Surface Roughness Tester

Comprises an LCD display and a detachable detector/drive unit. Parameters measured in Ra, Rq, Ry, Rz, Rt, Rp, R3z, Rk, Rpk, Rvk, S, Sm, Pc,..

PosiTector 200 B & C Ultrasonic Coating Thickness Gauge

PosiTector 200 B & C Ultrasonic Coating Thickness Gauge

Defelsco PosiTector 200 Advanced ultrasonic coating thickness gauge with type B & C Probes. Measures coating thicknes over wood, concre..

PCWI 30kV DC Porosity, Holiday  Detector

PCWI 30kV DC Porosity, Holiday Detector

DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit L..

Tags: concrete, hydraulic pressure, metal, positest, pull off adhesion tester