Your cart is empty!
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resistance and supply voltage. A large backlit liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed. Range: 0.1micro-Ohms to 999.9mW [subject to supply voltage and load resistance]. Accuracy: Voltage ±0.5% ± 0.1mV. Current ±0.5% ± 0.1A. Resistance: Better than micro-Ohms to 100mW. Output Current: [refer to data sheet chart for detail]. Power supply for: full output: 207 to 265V 50/60Hz with a load less than 7mOhms including current leads [i.e. standard 5m 50mm² current leads only, 4mOhms load]. Reduced output: Down to 100V 50/60Hz [refer to data sheet for detail]. Test Current Range: 10A to 600A unsmoothed DC in 1A steps. Accuracy: ±2% ±2A. Test Modes: Manual, Auto, Continuous. Test Time: 7 seconds NORMAL /AUTO mode. Refreshed every 2 seconds in CONTINUOUS mode. Voltmeter input impedance: >200kW. Data Transfer: Real time or batch download via RS232 using AVO Download Manager. Storage Capacity: 300 result sets...
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground le..
Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..
Four pole soil resistivity testing kit. IP54 rated, 2, 3 and 4 point testing. Selectable 25 V or 50 V output, complete with lead and stak..
The Megger MOM2 is a lightweight (1 kg), handheld micro-ohmmeter. Up to 220 A test current, auto ranging from 999 µohm to 1000 mohm fs. R..
Tags: dlro 600a,
megger dlro 600,
low resistance meter,