Megger INGVAR Primary Current Injection Test System

  • Megger INGVAR Primary Current Injection Test System

This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents.

The system consists of a control unit and a current unit. The two parts are portable, and INGVAR can be quickly assembled and connected.

The control unit has many advanced features – a powerful measurement section for example, that can display turns ratio as well as time, voltage and current. A second measurement channel can be used to test an additional current or voltage. Current transformer turns ratio, impedance, power, power factor (cos f) and phase angle are calculated and shown in the display. Current and voltage can be presented as percentages of nominal value. The fast-acting hold function freezes short-duration readings on the digital display when the voltage or contact signal arrives at the stop input, the object under test interrupts the current or injection is stopped.

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more

• Up to 5000 A output current

• Two units, each of about 20 kg, make it easier to carry

• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

Related Products

OMICRON  CP CB2 Current Booster

OMICRON CP CB2 Current Booster

Combined with the CPC 100, the CP CB2 boosts the output current of a CPC 100 from 800A to 2000A. ..

Multi-Amp MS-2 High Current Test Set

Multi-Amp MS-2 High Current Test Set

Designed to test overload relays, circuit breakers and earth fault trip devices. Input 240V 50/60Hz. Output continuously adjustable in 4 ..

Omicron  CPSB1 Switch Box

Omicron CPSB1 Switch Box

Switch Box to allow fully automated 3 phase transformer testing, accessory for the CPC100. ..

OMICRON CP TD1 Capacitance and Tan Delta add-on

OMICRON CP TD1 Capacitance and Tan Delta add-on

Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allo..

Tags: current injection, injection test system, megger, primary current