Your cart is empty!
Rent short or long term Electrical Power testing equipment to suit a range of industry measurements. If you do not see what you are looking for please call our technical sales team who will assist you with your enquiry.
Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. 3ph safe. Enables testing on 110V centre tapped..
High output current 5mA for fast charging of capacitive loads. Testing up to 10kV, mains or battery powered, digital/analogue backlit disp..
High output current 5mA for fast charging of capacitive loads. Testing up to 5kV, mains or battery powered, digital/analogue backlit disp..
Relay test set for 1 ph protective relay equipment. Three phase relay can be tested 1 ph at a time or by synchronising more than one unit..
The Megger TDR2000-3P is a dual channel TDR Cable Fault Locator. This instrument has user selectable ranges from 0 to 50 m up to 20 km and a..
Time Domain Reflectometer cable fault locator. User selectable ranges from 0 to 50m up to 20km, minimum resolution 0.1m. Dual cursor meas..
An advanced Circuit Breaker Analyser with built-in PC that utilises DualGround method for safer testing. Galvanically isolated inputs and ..
Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12V to 250V battery systems and can d..
The Megger Torkel 950 is a battery discharge load unit. It works with 7.5 V to 500 V battery systems and can discharge at up to 220 A (15 kW..
Optional accessory for the PRO,TORKEL-840 battery load unit. Adds up to an extra 112A load capacity to a discharge test (15.8kW maximum)...
Multifunction installation tester with measurement functions and Pass/Fail limits set to AS/NZS3000 Wiring Rules, and storing of test res..
Designed to test overload relays, circuit breakers and earth fault trip devices. Input 240V 50/60Hz. Output continuously adjustable in 4 ..
Corona video/still camera to record and display corona and partial discharge. IP54 includes GPS, temperature, and humidity measurement ca..
Combined with the CPC 100, the CP CB2 boosts the output current of a CPC 100 from 800A to 2000A.
Switch Box to allow fully automated 3 phase transformer testing, accessory for the CPC100.
Omicron ARC 256x Arc Flash Initiator. This is a CMC accessory designed to simulate an arc using a xenon tube. This CMC accessory It has a 6 ..
Protection relay test set and universal calibrator (energy meters, measuring transducers, power quality measurement devices, phasor measu..
The newest product in the CMC 256 series with improved accuracy specifications. Protection relay test set and universal calibrator (energ..
Protection relay test set with six current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), four voltage outputs (4 x 300V or 1..
Protection relay test set with six current sources (6 x
32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), four voltage outputs (4 x 300V or
Optional accessory for use with any OMICRON CMC test set. There are two GPS units in the kit. These units provide a start signal pulse ba..
Combined with the CPC 100, the CP CU1 is a measurement system for line impedances & k-factors of overhead lines or power cables, mutu..
Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allo..
Portable (29 kg) primary test system suited for testing of current transformers, voltage transformers, power transformers, power lines, H..
Portable (8 kg) and automated unit for testing protection and metering CTs on-site. CTs can be verified up to the 0.1 accuracy class. The..
The OMICRON FRAnalyzer uses swept frequency response analysis to detect mechanical and electrical changes of the core and winding assembl..
Sweep frequency response analyzer standard package with PTM software. Fully compliant with the IEC 60076-18 and IEEE C57.149 standards. Suit..
Combined with the CPC 100 and CP CU1, this kit is a measurement system for Step & Touch voltages. The battery powered FFT Voltmeter (..
Check the presence and sequence of the phases on 3ph circuits. Provides a visual indication of loss of phase or incorrect sequence. Suppl..
Tests elevating boom as well as the work platform and linings to ANSI A92.2 draft standard. Can also be used in many other Hipot applicat..
The Ponovo PCT200i CT/PT Analyser accurately tests all types of instrument transformers using low-frequency and variable-frequency method..
Relay test set for 1ph protective relay equipment. Three phase relays can be tested 1 phase at a time or by synchronising more than one u..
The Seaward PV200 Solar PV Tester with Irradiance Meter is a highly effective test and diagnostic solution for PV systems. This instrument c..
Comprises control unit and 2kA loading unit (LU). Control unit includes timer, current and voltage meters, and variable output transforme..
Trio SafeTCheck Pro Logger II PAT tester with RCD Option, Printer, Barcode & 3 Phase options. The 3 Phase option includes the two com..