Your cart is empty!
You have access to a range of Electronics testing equipment for short or long term rental periods. If you do not see what you are looking for please call to discuss your requirements with one of our experienced team.
Handheld digital ELF gauss meter. Maintains accuracy regardless of orientation. Applications include detecting magnetic field emissions f..
Magnetic measuring equipment, portable gaussmeter. Built-in software eliminates the need for complex calibration procedures. Key features ..
Multi-ranging DC power supply allowing any combination of the rated 600 V and 8.5 A up to the maximum output power of 3000 W...
Fluke 200 MHz 2.5 GS/s (1.25 GS/s 4ch), 4 channel digital oscilloscope with DMM. Features Persistence mode, Connect-and-View triggering f..
The Fluke 233 is a digital multimeter with a remote display. The removable display has a range of 10 m, allowing the user flexibility when t..
Fluke 28II Ex Intrinsically Safe Multimeter is a completely sealed IP67 rated case. For use inside and outside of hazardous zones. ..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous v..
The Fluke 80i-110s ac/dc current clamp is designed for oscilloscopes that uses a Hall effect cell for the measurement of dc or ac current..
Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurem..
7 decades by 0.01 ohms to 111 kohms. Accuracy 0.01% +0.002 ohms. Useful for platinum resistance thermometer calibration. NATA calibrated...
7 decades by 0.01ohms to 111K ohm. Accuracy 0.01% +0.002 ohms. Useful for platinum resistance thermometer calibration...
IET Labs, Inc. RTD-250 RTD Simulator. 20 to 1,121.10 Ohm, 5 decades, accuracy (ppm) 200, resolution 10 m Ohm.
Hioki 3532-50 frequency range 42 Hz to 5 MHz. 5 ms high speed measurements. Basic accuracy of ±0.08%. Memory for 30 sets of measurement c..
Low frequency field meter designed to evaluate electric & magnetic fields associated with 50hz power lines. Frequency range 50 - 1000 ..
Three orthogonal field sensors. Dynamic range 0.2 mG~20 G. True RMS detection. Frequency range 5 Hz~2 kHz with an in-built 30 Hz high pass..
The Keysight 33612A, 80 MHz, 2 channel waveform generator measures sine, square, pulse, ramp, triangle, Gaussian noise, PRBS and arbitrar..
Precision 6.5 digit Multimeter. 100% drop-in 34401A compatibility, graphical views of your measurement results, long-term trends and meas..
Programmable dc Source. 0 to 20 V, 0 to 5 A. Built-in advanced measurement system to accurately measure battery current drains. Battery em..
4 channel 200 MHz digital storage oscilloscope. Sampling rate 2 G/s (4 G/s half-channel interleaved mode). 2 Mpts memory depth, waveform ..
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 4 Gsa/s. XGA Colour display updates 100,000 waveforms/s with 256 levels intens..
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 5 Gsa/s. XGA Capacitive touch Colour display updates 1,000,000 waveforms/s with 64 lev..
The Keysight N6702A Low Profile Modular Power System Mainframe comes with 2 x N6762A precision dc power modules (100 W), 1 U high. Each m..
With up to 2 GSa/s sampling rate and 2 Mpts memory depth, this 200 MHz two channels handheld scope captures more waveforms from signals su..
1000 watt electronic load. Voltage range 1.5 to 120V. Current range 0 to 200A. Provides constant current, resistance, voltage, and power ..
Narda NBM-520 field strength meter with EF1891 'E' field probe. Detects electric fields from 3 MHz to 18 GHz, covering fields generated by..
Narda NBM-550 field strength meter with EF1891 'E' field probe. Detects electric fields from 3 MHz to 18 GHz, covering fields generated b..
For the installation, maintenance and commissioning of terrestrial, satellite and cable TV systems DVB T/C/S/S2. The HD TAB 7 LITE can..
The FMX-004 fieldmeter is a compact electrostatic fieldmeter used for locating and measuring static charges. Its pocket size and three-bu..
0-150 V, 20 A, 3 kW. Applications range from manufacturing test and burn-in of automotive components, avionics electronics, telecommunicat..
0~60V, 0~50A. Max power on a 240V 3ph supply 3kW, 2.5kW on a 1ph 240V supply. On 1ph 50V@50A or 60V@42A. Remote programming.
2.8 kW programmable DC power supply 0 to 600 V, 0 to 4A. RS-232 and isolated analogue control options.
Sampling rate 1 GS/s. All 4 channels isolated for floating measurements. Sensitivity 2 mV to 5 V/div. Measurements for current and voltage..