Fluke 975 AirMeter Indoor Air Quality Monitor

  • Fluke 975 AirMeter Indoor Air Quality Monitor

Indoor air quality (IAQ) monitoring, measure temperature, humidity, CO and CO2 concentrations. Humidity range 10 to 90%, temperature range -20 to 50°C. CO measurement range 0 to 500 ppm and CO2 range 0 to 5000 ppm. Dew point temperature and wet bulb temperature is calculated. Data logging for 25,000 data point with 1 min to 1 h interval. Comes with USB cable for download interface and software viewing and reporting. Battery operated.

Related Products

Aeroqual logging ozone monitor - indoor air quality use

Aeroqual logging ozone monitor - indoor air quality use

Portable ozone monitor fitted with low concentration-range detection head. Operating range 0~0.5ppm ozone with display in ppm or mg/m3. Ga..

Odalog NO2 and CO Area Monitor for Vehicle-parks and IAQ

Odalog NO2 and CO Area Monitor for Vehicle-parks and IAQ

Portable multi-gas monitor for area air-quality measurement, logging, or personal monitoring in car-parks, loading areas, and related zon..

IONSCIENCE Gascheck Helium,butane & SF6 detector

IONSCIENCE Gascheck Helium,butane & SF6 detector

Microthermal conductivity gas detector. Reading in cc/sec, g/yr, mg/m3 or ppm. Detects most gases however particularly suited to ammonia,..

PPM HTV-M Formaldehyde Meter

PPM HTV-M Formaldehyde Meter

Portable Formaldehyde meter for measuring airborne formaldehyde in the workplace. Electrochemical sensor, with internal pump for rapid re..

Tags: fluke, humidity, indoor air quality, temperature