Your cart is empty!
General Industrial testing equipment is available to rent for short or long term periods. Available to suit an array of industries and measurements. Please call if you do not see what you are looking for.
Beamex external pressure modules compatible with MC6, MC5, MC4, MC2 MC5-IS, MC2-IS and MC5P calibrators. Various rangers available, please i..
SIRIM certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and C..
Range -1 to 1 bar (15 psi) NATA certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of full sc..
Range -1 to 138 bar (2,000 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of ..
Range -1 to 20 bar (300 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of full ..
Range 20Bar resolution 1mBar. Accuracy 4 to 20Bar +/-0.1% of reading. 0 to 4Bar +/-4mBar. It Has a 6000 point logging capability. Logging..
Range 210Bar resolution 0.01Bar. Accuracy 40 to 200Bar +/-0.1% of reading. 0 to 40Bar +/-0.04Bar. Has a 6000 point logging capability. Lo..
Range 700Bar resolution. 0.01Bar accuracy. 1% of reading. Has logging capability. 6000 point pressure logging capability. Logging interva..
Range 7Bar resolution 0.1mBar. Accuracy 1.4 to 7Bar +/-0.1% of reading. 0 to 1.4Bar +/-1.4mBar. Vacuum +/-17.5mBar. Has a 6000 point logg..
Includes a built in GSM modem for internet access to the device. Measures voltage, current, resistance and frequency. Up to 5 analogue (±..
Analog inputs 32 isolated and 48 single ended inputs. 2x 4 digital input types. 2x serial sensor ports, Modbus capability, , 4x SDI12 cha..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 200 ba..
Druck DPI 620 Genii advanced modular pressure calibrator with HART, includes pneumatic pressure station with 1/8 BSP(G) or 1/8 NPT test p..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 100 bar, acc..
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range 0 - 350 bar (5000 psi) +/- 0.005% FS. Voltage inpu..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 70 bar, accu..
Druck DPI620 Genii advanced modular pressure calibrator with HART, includes hydraulic pressure station with 1/8 BSP(G) or 1/4 NPT test po..
Druck PV211 Pneumatic Hand Pump. 40 Bar pneumatic pressures and vacuum to -0.95 Bar. Comes with Precision Vernier for fine pressure adjust..
Druck PV212 Hydraulic Hand Pump. Provides up to 700 Bar hydraulic pressure...
Provides up to 700 Bar hydraulic, 40 Bar pneumatic pressures and vacuum to -950 mBar. Built-in stroke adjuster, lower pressure fine contr..
Easy-Laser XT660 use dot laser technology with single axis TruePSD 20x20mm detectors. Measurement resolution of 0.001mm with max. measuremen..
Discontinued & Unavailable for rental: The Emerson 475 has been replaced by the Emerson AMS Trex.Emerson AMS Trex Device Communicato..
Discontinued & Unavailable for rental: The Emerson 475 has been replaced by the Emerson AMS Trex.Emerson AMS Trex Device Communicator..
Intrinsically safe HART device communicator. Allows technicians to configure, isolate, diagnose and repair problems while devices continue t..
The Emerson AMS Trex is an intrinsically safe HART and Foundation Fieldbus device communicator. It allows technicians to configure, isola..
Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..
Measurement resolution to 0.01mm Shaft diameter range 25 to 175mm using an extension chain 25 to 450mm. Maximum distance between measurement..
-20°C to 650°C, IR resolution 320 x 240, 30 Hz. Display 10 cm, 640 x 480 touchscreen, 1-4 continuous digital zoom, video recordin..
FLIR high performance thermal imaging camera. Features include an on-board 5 MP visual camera, 640 x 480 thermal resolution, 8X continuous z..
Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy +/-0.05% of reading +0.3 degreeC. ..
Temperature measurement range from -30 to 900°C. with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accur..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Fluke 789 is both digital multimeter and a loop calibrator which has 2 to 20mA sink and source capability, including a 24V (Loop) supply. ..
Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..
Fluke ii900 ultrasonic visual imager, Displays the location and magnitude of compressed air leaks. Operates from 2kHz~52kHz will detect leak..
The Fluke Ti400 infrared thermal imaging camera can record AVI video, and is suitable for almost any application such as electrical surve..
Fluke Ti480 Pro thermal imaging camera, temperature range -10 to 1,000 degC, 640 x 480 thermal resolution (1280 x 960 with SuperResolution m..
Temperature range -20 to 400 degC, IR resolution 320 x 240, 9Hz, IFOV 1.86mrad, 3.5 inch LCD screen, fixed focus. IR-Fusion, captures a digi..
Fluke Hart Metrology well calibrator. Temperature range -45 to 140 degC with built in reference thermometry. Reference input accepts (not..
Portable non-contact gas flowmeter using transit-time principle. For operation with ultrasonic transducer-kits [PAN,GC-RL301/2..] availab..
Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100 deg C ..
The Grant Squirrel 2020 Data Logger measures voltage, current, and resistance. This instrument features 16 single ended inputs and 8 diff..
Contact/Non Contact Optical Tachometer. Speed range for non-contact measurement is 30 rpm to 99,990 rpm, and contact base measurement is ..
Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC mode for waveform monitor output DC to 3MHz, AC mode detection of ..
Hioki LR8431-20 10 Channel Memory Logger with isolated channel to 60 V dc which will take thermocouples. 10 ms sampling USB interface and..
Hioki MR8847-53 Memory recorder with 8 analogue and 16 logic channels (16 logic probes supplied). High-speed 20MS/s,Fully Isolated Memory ..
SAMM Calibrated Jofra CTC-1200A dry well temperature calibrator. Range 300 to 1,205 degC. Accuracy +/- 2 degC, stability +/-0...
NATA calibrated Jofra CTC-1205A dry well temperature calibrator. Range 100 to 1,205 degC. Accuracy +/- 2 degC, stability +/-0.1 ..
Ametek Jofra CTC-660A Dry Block Temperature Calibrator with NATA certification. Range of 28 to 660°C. Accuracy +/-0.85°C, stability +/-0...
Various insert sizes for the Jofra CTC-660A. Please inquire...
