PCWI 40kV Pulse Porosity (Holiday) Detector

  • PCWI 40kV Pulse Porosity  (Holiday) Detector

Pulse porosity (Holiday) detector. Detects pinholes in coatings and wrapping above 150µm on metal substrates such as pipes and tanks. Can be used on dry or wet surfaces. 0~40kV output, 4 digit LED display of voltage, alarm sensitivity setting between dry and wet. Supplied with rechargeable battery, 10h charger, red probe handle and 2m length of rubber coated cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension and 80mm probe extension.



Related Products

Mitutoyo SJ-210-NATA Surface Roughness Tester

Mitutoyo SJ-210-NATA Surface Roughness Tester

Comprises an LCD display and a detachable detector/drive unit. Parameters measured in Ra, Rq, Ry, Rz, Rt, Rp, R3z, Rk, Rpk, Rvk, S, Sm, Pc,..

Olympus Ultrasonic Probe for OLY,38DL & PAN,26MG

Olympus Ultrasonic Probe for OLY,38DL & PAN,26MG

Ultrasonic high temperature probe for PAN,26MG amd OLY,38DL 5MHz 7.9mm tip diameter. Operating temperature range -20DegC~ 500DegC. ..

Defelsko Positest Pull Off Adhesion Tester for Con & Metal

Defelsko Positest Pull Off Adhesion Tester for Con & Metal

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is di..

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Gauge

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Gauge

Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standa..

Tags: 40kv, pcwi, pulse porosity holiday detector