Your cart is empty!
Rent a wide array of Radio Frequency testing instrumentation for short or long term periods. If you do not see what you are looking for please contact us as continually add equipment to our rental fleet.
Portable Spectrum Analyser, 9 kHz to 9.4 GHz comes attached with directional antenna. DANL -155 dBm (1 Hz) with preamp DANL -170 dBm (1 H..
Portable 9k to 31.8GHz spectrum analyser. 3 power mode: Battery, 240V & DC. RBW 100Hz-3MHz, sensitivity -117 dBm@34 GHz (typ). Includ..
Double ridge guide horn antenna. 700MHz to 18GHz frequency range. Continuous power 300W. 50ohm 200V/m maximum radiated field. Type N(F) c..
Anritsu MP534A dipole antenna 25 to 520MHz and MP651A 470 to 1700MHz.
Portable spectrum analyser. 100 kHz to 3 GHz. Light weight battery powered spectrum analyser with LCD. Resolution bandwidth down to 10 KHz..
Anritsu MS2712E portable hand held spectrum analyser 9 kHz to 4 GHz, DANL -162 dBm in 1 Hz RBW, RBW 1 Hz to 3 MHz. Tracking generator -50 ..
Anritsu MW82119B Passive Intermodulation (PIM) analyser with measurement frequency 2100 MHz and Site Master (cable and antenna analysis) o..
The Anritsu MW82119B Passive Intermodulation (PIM) analyser with frequency option has a Cellular 850 MHz band, is portable battery-operate..
Antenna and cable test set. Battery operated with colour display. Frequency range 25 to 4000 MHz. Measures return loss, SWR, cable loss, ..
Anritsu Cable and antenna analyser with 2 port transmission option (21), frequency range 2 Mhz to 4 GHz. Measures return loss, VSWR, cable..
Cable and antenna analyser, frequency range 2Mhz to 4GHz. Measures return loss, VSWR, cable loss, and Distance To Fault. Suitable for lega..
Cable and antenna analyser, frequency range 2 MHz to 4 GHz. Built-in power meter that measures 50 MHz to 4 GHz, -33 dBm to +20 dBm.&..
Antenna and cable test set with spectrum analyser. Frequency range 25 to 3300 MHz for cable and antenna test. 9 kHz to 3 GHz for spectrum ..
Antenna and cable test set including spectrum analyser. Frequency range 25 to 4000MHz. RBW 100Hz to 1MHz. Measures return loss, SWR, cabl..
Anritsu antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4GHz. DANL -152dBm. Options included, indoor outdoor Cover..
Anritsu antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4 GHz. DANL -152dBm. Measures return loss, VSWR, cable los..
Microwave antenna and cable test set. Portable single port analyser, providing return loss (SWR) insertion loss and distance to fault meas..
The Anritsu S820E is a microwave antenna and cable analyser. It has a frequency range from 1 MHz to 20 Ghz with 110 dB dynamic range. Coaxia..
Microwave antenna and cable analyser, frequency range 20 MHz to 20 Ghz with 110 dB dynamic range. Performs coaxial and waveguide system m..
Waveguide Adaptor component used along with Anritsu, S820A & S820D. Please request for the suitable type.
Ambient Temperature: -40°C to +40°C Connector: N Coolant: Dry (Convection cooled) Finish: Black anodized fins. Frequency Range and VSWR: ..
RF THRULINE POWER METER. Requires bird element of specified frequency and power. Measures forward and reflected power by reversing the ele..
Bird element suitable to use with Bird 43 and Bird 4391A (Power Meters). Available in various power and frequency ranges. Power range: 5 ..
AH-118 Duble Ridged Horn Antenna. Specifications below: Frequency Range: 1 GHz - 18 GHz VSWR: 2.0 :1 Polarization: Linear Output Impedanc..
Linear wideband RF power amplifier. 4 W output at an input of 0.13mW from 0.5 to 1GHz. Saturated output 7W 0dBm input. Extended performanc..
The R8000 Communication System Analyser is a portable test instrument designed to monitor and service radio communications equipment over ..
Frequency range 9 kHz-26.5GHz. Resolution bandwidth down to 30Hz. Noise level -105 to -136dBm according to frequency. Centre frequency di..
3 GHz frequency counter. Option 010 high stability timebase included. HPIB interface.
The 8449B Microwave Preamplifer is a high-gain(+30dB gain), low-noise preamplifier that has a frequency range of 1 to 26.5GHz. It increase..
Keysight 8494/5B Attenuator Set 81dB x 1dB. DC to 18Ghz. Maximum continuous power 1 watt. Note attenuator uses 3.5 mm connectors
9 kHz to 4000 MHz signal generator with AM/FM/Phase modulation output range from +10 to -136 dBm with +/-1 dB accuracy up to 2500 MHz. 0...
A comprehensive set of software tools for demodulation and vector signal analysis. Measure and analyze signals in the time, frequency and..
Power meter, for peak, average, peak-to-average ratio and time-gated measurements. 100 uW to 25 W (-70 dBm to 44 dBm), 9 kHz to 110 GHz (p..
100µW to 25W (-70dBm to 44dBm), 9 kHz to 110 GHz (power sensor dependent ), 4 digit display - watts, dBm, dB (rel). Battery or mains power..
Keysight E4432B ESG-D3000A 3GHz RF Digital signal generator
Vector signal generator, 250 kHz to 3 GHz. Built-in function generator. Wideband AM and FM. Internal baseband generator (8 Msa), internal ..
Option 506 provides a 250 kHz to 6 GHz frequency range. Five frequency range options are available to choose from, extending from 1 GHz up..
Keysight E5071C-260, 2 port 9 kHz to 6.5 GHz network analyser with integral S-parameter test set. Dynamic range >123 dB. High stability..
Power sensor for Keysight EPM series power meters. E-series Average Power Sensor. 10 MHz - 18 GHz, 1 nW - 100 mW (-60 dBm to +20 dBm).
Keysight MXG-X RF Analogue Signal Generator, 9 kHz to 6 GHz, -144 to +19 dBm. Features fast switching, low phase noise, pulse, and narrow ..
The Keysight N9030A PXA is a real-time spectrum analyser measuring 3 Hz to 26.5 G with built-in Pre-Amp (+20 dB) and Electronic Attenuato..
Keysight N9344C spectrum analyser 9 kHz to 20 GHz with 5 MHz to 7 GHz tracking generator. -144 dBm displayed average noise level (DANL), &..
Agilent/Keysight N9344C spectrum analyser 9 kHz to 20 GHz with GPS. -144 dBm displayed average noise level (DANL), <0.95 s sweep time f..
(1) Freq range: 10MHz ~ 20.0GHz (2) Power range: -30dBm to +20dBm (1 uW to 100mW) (3) Max RF i/p: +25 dBm (300 mW) CW +42 dBm (15 W) peak..
(1) Freq range:10MHz~26.5GHz. (2) I/p power;range:-30dBm (1uW) to +20dBm (100mW). max:+25dBm (300mW) CW, +42dBm (15W) peak for 2 us. sens..
DIGITAL POWER METER. 0.1NW - 30W. 30KHZ-46GHZ (DEPENDANT ON POWER SENSOR). FOUR DIGIT DISPLAY-DBM, nW, uW, mW, W, mV, V, dBV. HAND HELD, ..
RF connection adaptors. Comprises couplers with interchangeable connectors; DIN 7/16, N Type, BNC, SMA, TNC, APC-7 and UHF
Measures directional power forward and reverse under operational conditions. NRT-Z44 sensor included, range 3 mW to 120 W, 200 MHz to 4 G..