Your cart is empty!
TechRentals offers flexible rental plans with periods from a day to a year or more. Purchase options are also available. Inventory is held in Malaysia and Australia with the latter being available at short notice and being more viable for longer rental periods. Please enquire.
Portable PQA with GPS receiver to to measure, store & analyze (continuously) waveform signals. Includes G4500 with 4x 3000A Flexible Cur..
Discontinued & Unavailable for rental: The Emerson 475 has been replaced by the Emerson AMS Trex.Emerson AMS Trex Device Communicato..
Discontinued & Unavailable for rental: The Emerson 475 has been replaced by the Emerson AMS Trex.Emerson AMS Trex Device Communicator..
Intrinsically safe HART device communicator. Allows technicians to configure, isolate, diagnose and repair problems while devices continue t..
The Emerson AMS Trex is an intrinsically safe HART and Foundation Fieldbus device communicator. It allows technicians to configure, isola..
Hand-held fusion splicer, can splice from 1 to a maximum of 12-ribbon fibre. Protection sleeve shrink time is 35 seconds for ribbon fibre..
The Fitel S179 is a handheld core-alignment fusion splicer for single and multimode fibres. It includes an S326 cleaver. Typical 6 s splice ..
Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..
Measurement resolution to 0.01mm Shaft diameter range 25 to 175mm using an extension chain 25 to 450mm. Maximum distance between measurement..
-20°C to 650°C, IR resolution 320 x 240, 30 Hz. Display 10 cm, 640 x 480 touchscreen, 1-4 continuous digital zoom, video recordin..
FLIR high performance thermal imaging camera. Features include an on-board 5 MP visual camera, 640 x 480 thermal resolution, 8X continuous z..
The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..
Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground l..
Fluke 1663 Installation Tester. Provides the foillowing tests Continuity test under 200mA, Loop Impedence without triggering an RCD can be s..
Fluke 3 phase power logger with Fluke connect mobile app. Includes 4x 1500 amp flex probes (1 A to 150 A . 1 A resolution 30 mA accuracy)..
The Fluke 1777 automatically measures power and power quality parameters. At a glance power quality and power health parameters. Capture hig..
Fluke 200 MHz 2.5 GS/s (1.25 GS/s 4ch), 4 channel digital oscilloscope with DMM. Features Persistence mode, Connect-and-View triggering f..
Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuit..
The Fluke 233 is a digital multimeter with a remote display. The removable display has a range of 10 m, allowing the user flexibility when t..
Fluke 28II Ex Intrinsically Safe Multimeter is a completely sealed IP67 rated case. For use inside and outside of hazardous zones. ..
Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and hig..
Fluke 376 True-RMS 2500A AC & 1000A DC Clamp meter, includes a flexible current probe. will record Min Max and Average. Measure AC vo..
Power Quality Analyser function to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator ..
Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy +/-0.05% of reading +0.3 degreeC. ..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo..
Temperature measurement range from -30 to 900°C. with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accur..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Fluke 789 is both digital multimeter and a loop calibrator which has 2 to 20mA sink and source capability, including a 24V (Loop) supply. ..
The Fluke 80i-110s ac/dc current clamp is designed for oscilloscopes that uses a Hall effect cell for the measurement of dc or ac current..
Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurem..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..
Indoor air quality (IAQ) monitoring, measure temperature, humidity, CO and CO2 concentrations. Humidity range 10 to 90%, temperature rang..
Fluke multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 13..
Fluke CFP-SM optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 1310 and 1550 nm in 3 s. A set refer..
The Fluke DSX-5000 1 GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE ..
Fluke DSX-8000 2GHZ cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 40 GigE deployme..
Fluke SimpliFiber FTK1000 fibre test kit. Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550nm s..
A pack of 3 pieces of the i5s 5 A ac current clamps, specially configured to provide low current accuracy while taking measurements on se..
Fluke ii900 ultrasonic visual imager, Displays the location and magnitude of compressed air leaks. Operates from 2kHz~52kHz will detect leak..
Fluke ii910 Precision Acoustic Imager. Suitable to locate partial discharge, corona discharge as well as gas and vacuum leaks. Frequency ran..
Fluke MDA-550 is a Motor drive analyzer designed to monitor and troubleshoot VFD (or VSD) motor systems. Features 4 channels, measurement to..
Fluke Optifiber Pro Quad multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm, dynamic range 28, 30, 32 and 30 dB respectively...
Fluke SMFT-1000 Solar I-V Curve Tracer Pro Kit for PV installation, commissioning, inspection, and maintenance testing that conforms to IEC ..
The Fluke Ti400 infrared thermal imaging camera can record AVI video, and is suitable for almost any application such as electrical surve..
Fluke Ti480 Pro thermal imaging camera, temperature range -10 to 1,000 degC, 640 x 480 thermal resolution (1280 x 960 with SuperResolution m..
Temperature range -20 to 400 degC, IR resolution 320 x 240, 9Hz, IFOV 1.86mrad, 3.5 inch LCD screen, fixed focus. IR-Fusion, captures a digi..
Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1 s..
Fluke Hart Metrology well calibrator. Temperature range -45 to 140 degC with built in reference thermometry. Reference input accepts (not..
Fujikura FSM70R+ 12-core ribbon fiber fusion splicer. Typically splice time 15 seconds and sleeve shrink time 40 seconds. Detachable work ta..
Fujikura FSM70S single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02 dB and 0.01 dB on single and ..
Fujikura FSM70S+ single fibre core alignment fusion splicer and CT50 cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multi..
Fujikura FSM90S+ (Active Fusion Control) single fibre core alignment fusion splicer and CT50 Bluetooth cleaver. Typical splice losses of 0.0..
