Your cart is empty!
TechRentals offers flexible rental plans with periods from a day to a year or more. Purchase options are also available. Inventory is held in Malaysia and Australia with the latter being available at short notice and being more viable for longer rental periods. Please enquire.
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
The Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250 resistor, 20mA drive into 1,200..
The Fluke 80i-110s ac/dc current clamp is designed for oscilloscopes that uses a Hall effect cell for the measurement of dc or ac current..
Tests rotating machinery to determine the status of gearing wear etc. Used to: Troubleshoot equipment and understand cause of failure. Co..
Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurem..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..
Fluke 9150 Thermocouple Furnace NATA certified. Temperature range 150 to 1,200°C. Stability ±0.5°C, display accuracy of ±5°C across..
Fluke Metrology dry well calibrator temperature range -45 to 140°C. Display accuracy ±0.1°C, stability ±0.005°C full range, resolution 0.0..
Indoor air quality (IAQ) monitoring, measure temperature, humidity, CO and CO2 concentrations. Humidity range 10 to 90%, temperature rang..
Fluke multimode (CFP-MM-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850 and 1300 nm in 3..
Fluke multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 13..
Fluke CFP-SM optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 1310 and 1550 nm in 3 s. A set refer..
The Fluke DSX-5000QOi contains the DSX-5000 copper analyser, CertiFiber Pro OLTS quad wavelength, Optifiber Pro OTDR quad wavelength, and..
The Fluke DSX-5000 1 GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE ..
The Fluke DSX-8000QOi contains the DSX-8000 copper analyser, CertiFiber Pro OLTS quad wavelength, Optifiber Pro OTDR quad wavelength and a U..
Fluke DSX-8000 2GHZ cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 40 GigE deployme..
The FI-7000 FiberInspector Pro is a fiber optic inspection scope that allows you to inspect and certify fiber optic connector end-faces in..
Fluke SimpliFiber FTK1000 fibre test kit. Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550n..
A pack of 3 pieces of the i5s 5 A ac current clamps, specially configured to provide low current accuracy while taking measurements on se..
The FI-1000 FiberInspector kit enables you to quickly inspect and certify fibre end-faces inside ports or patch cords. It's 2-second autom..
Fluke Optifiber Pro Quad multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm, dynamic range 28, 30, 32 and 30 dB respectively...
Fluke P5510-2700G Pneumatic Calibrator and 20 bar (300 psi) gauge. ..
The Fluke Ti400 infrared thermal imaging camera can record AVI video, and is suitable for almost any application such as electrical surve..
Temperature range -20 to 450°C, resolution 220 x 165, 9 Hz refresh, NETD 80 mK. IR-Fusion technology, manual focus, sighting laser and in..
Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1 s..
Fluke Hart Metrology well calibrator. Temperature range -45 to 140 degC with built in reference thermometry. Reference input accepts (not..
Fujikura FSM70R 12-core ribbon fibre fusion splicer. Typically splice time 15 s and sleeve shrink time 40 s. Detachable work table and ar..
Fujikura FSM70R+ 12-core ribbon fiber fusion splicer. Typically splice time 15 seconds and sleeve shrink time 40 seconds. Detachable work ta..
Fujikura FSM70S single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02 dB and 0.01 dB on single and ..
Fujikura FSM70S+ single fibre core alignment fusion splicer and CT50 cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multi..
The Futek IHH500 Display & LCF400-FSH03132 loadcell operate at up to 2 tonnes (5000lb) in compression and tension. The IHH500 hand he..
The Futek IHH500 Display & LCF500-FSH02968 loadcell operate at up to 20 tonnes (50,000lb) in compression and tension. The IHH500 hand..
Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 500kHz for pipes in the range 75-300mm..
Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 1MHz for pipes in the range 20-55mm ty..
USB Impact Accelerometer provides 3 axis 512 Hz sampling. Built-in 2G micro SD card. 500 g sensors. ..
USM 36 DAC Ultrasonic Testing Package with evaluation using AWS, DAC, JISDAC and TCG. Supplied with MB 4 S / Straight beam probe MWB 4..
GE ADTS542F Wireless Air Data Test Set. Pitot Static Tester for Aircraft Maintenance. Remote control unit for easy in cockpit control of in..
GE DynaMic rebound hardness tester tests to ASTM A956 and DIN 50156. Will compensate for changes in testing direction. Provides rea..
GE Everest Ca-Zoom and hand-held controller is a portable, case-mounted, camera controller with real-time, multitasking software operatin..
The PTZ-140 is 140 mm diameter colour camera head module (fits through a 140 mm opening) and features a 360° pan, 234° tilt, 36x optical an..
The PTZ-70 camera is 70 mm in diameter (fits through a 76 mm opening) and features 10x optical zoom and 4x digital zoom for a total of 40x ..
GE Mentor EM Dual Eddy Current Flaw Detector. Dual Probe Module; Connectivity Module with USB and X & Y Encoder Inputs and TTL Outputs. ..
The GE Mentor Visual iQ Inspect 3 meter, 4 mm diameter handheld videoscope. This device has a 16.5 cm daylight readable LCD screen for ea..
Intrinsically safe moisture analyser for compressed air systems, non-corrosive gases & hydrocarbons such as natural gas (IS certifica..
Portable non-contact liquid flowmeter using transit-time principle. Includes transducers to measure energy and transducers for pipe 50mm ..
Portable non-contact gas flowmeter using transit-time principle. For operation with ultrasonic transducer-kits [PAN,GC-RL301/2..] availab..
Portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and transducers for pipe 50mm to 2mØ & tem..
The GE PT900 is a portable, non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and 2 sets of transducers (1..
The R8000 Communication System Analyser is a portable test instrument designed to monitor and service radio communications equipment over ..
7 decades by 0.01 ohms to 111 kohms. Accuracy 0.01% +0.002 ohms. Useful for platinum resistance thermometer calibration. NATA calibrated...
7 decades by 0.01ohms to 111K ohm. Accuracy 0.01% +0.002 ohms. Useful for platinum resistance thermometer calibration...
IET Labs, Inc. RTD-250 RTD Simulator. 20 to 1,121.10 Ohm, 5 decades, accuracy (ppm) 200, resolution 10 m Ohm. ..
Measures CH4, CO2, O2, CO & H2S. Designed for spot measurements. Intrinsically safe and has a built in GPS system. It can also measur..
Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100 deg C ..
