Your cart is empty!
TechRentals offers flexible rental plans with periods from a day to a year or more. Purchase options are also available. Inventory is held in Malaysia and Australia with the latter being available at short notice and being more viable for longer rental periods. Please enquire.
3 GHz frequency counter. Option 010 high stability timebase included. HPIB interface.
Programmable dc Source. 0 to 20 V, 0 to 5 A. Built-in advanced measurement system to accurately measure battery current drains. Battery em..
Keysight 6675A is 102 VDC, 18Amp, 2000 watt, auto-parallel up to five units, output can be connected in series, programmable over-voltage..
The 8449B Microwave Preamplifer is a high-gain(+30dB gain), low-noise preamplifier that has a frequency range of 1 to 26.5GHz. It increas..
Keysight 8494/5B Attenuator Set 81dB x 1dB. DC to 18Ghz. Maximum continuous power 1 watt. Note attenuator uses 3.5 mm connectors
9 kHz to 4000 MHz signal generator with AM/FM/Phase modulation output range from +10 to -136 dBm with +/-1 dB accuracy up to 2500 MHz. 0...
A comprehensive set of software tools for demodulation and vector signal analysis. Measure and analyze signals in the time, frequency and..
4 channel 200 MHz digital storage oscilloscope. Sampling rate 2 G/s (4 G/s half-channel interleaved mode). 2 Mpts memory depth, waveform ..
Power meter, for peak, average, peak-to-average ratio and time-gated measurements. 100 uW to 25 W (-70 dBm to 44 dBm), 9 kHz to 110 GHz (p..
Keysight E5071C-260, 2 port 9 kHz to 6.5 GHz network analyser with integral S-parameter test set. Dynamic range >123 dB. High stability..
Power sensor for Keysight EPM series power meters. E-series Average Power Sensor. 10 MHz - 18 GHz, 1 nW - 100 mW (-60 dBm to +20 dBm).
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 4 Gsa/s. XGA Colour display updates 100,000 waveforms/s with 256 levels intens..
1 GHz 4 + 16 channel mixed signal oscilloscope (MSO). 5 Gsa/s. XGA Capacitive touch Colour display updates 1,000,000 waveforms/s with 64 lev..
Keysight MXG-X RF Analogue Signal Generator, 9 kHz to 6 GHz, -144 to +19 dBm. Features fast switching, low phase noise, pulse, and narrow ..
The Keysight N6702A Low Profile Modular Power System Mainframe comes with 2 x N6762A precision dc power modules (100 W), 1 U high. Each m..
The Keysight N9030A PXA is a real-time spectrum analyser measuring 3 Hz to 26.5 G with built-in Pre-Amp (+20 dB) and Electronic Attenuato..
Keysight N9344C spectrum analyser 9 kHz to 20 GHz with 5 MHz to 7 GHz tracking generator. -144 dBm displayed average noise level (DANL), &..
Agilent/Keysight N9344C spectrum analyser 9 kHz to 20 GHz with GPS. -144 dBm displayed average noise level (DANL), <0.95 s sweep time f..
Keysight U1253B true RMS 4.5 digit handheld digital multimeter (DMM). Up to 0.025% basic DCV accuracy. Organic LED (OLED) display that pro..
With up to 2 GSa/s sampling rate and 2 Mpts memory depth, this 200 MHz two channels handheld scope captures more waveforms from signals su..
1000 watt electronic load. Voltage range 1.5 to 120V. Current range 0 to 200A. Provides constant current, resistance, voltage, and power ..
Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail ..
Kingfisher singlemode light source KI-28010 and power meter KI-2600. Compatible with APC and PC singlemode networks. Wavelengths 1310, 15..
Kit consists of Encircled Flux (EF) compliant test reference leads suitable for use with the Fluke CertiFiber Pro Optical Loss Test Set on t..
The MadgeTech TSR101-EB-5 transport logger with 5g triaxial accelerometer. Extended battery option gives the device a 30 day battery life. ..
(1) Freq range: 10MHz ~ 20.0GHz (2) Power range: -30dBm to +20dBm (1 uW to 100mW) (3) Max RF i/p: +25 dBm (300 mW) CW +42 dBm (15 W) peak..
(1) Freq range:10MHz~26.5GHz. (2) I/p power;range:-30dBm (1uW) to +20dBm (100mW). max:+25dBm (300mW) CW, +42dBm (15W) peak for 2 us. sens..
DIGITAL POWER METER. 0.1NW - 30W. 30KHZ-46GHZ (DEPENDANT ON POWER SENSOR). FOUR DIGIT DISPLAY-DBM, nW, uW, mW, W, mV, V, dBV. HAND HELD, ..
Range 0~1,000N accuracy 0.1% 5 digit display. Sampling rate 1kHz. Overload protection and counter. Outputs analog, RS232 & Mitutoyo. ..
Range 0~1000N accuracy 0.1%. 5 digit back lit display. Peak data sampling rate 5kHz. 120% overload warning, display invert (reverse) func..
Relay test set for 3 ph protective relay equipment. Current ranges to 105 A. ac outputs to 900 V and dc outputs to 900 V. Power Factor &a..
Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12 V to 480 V battery systems and can..
The Megger MWA330A Winding Resistance Analyser combines TTR and resistance testing in a single unit. It performs the following tests: three-..
Provides reliable cable identification for both energised and non-energised cables. It can generate pulses on 440 V 3 phase cables.
The Megger CAL 300 is exclusively used for calibration of Megger IDAX Insulation Diagnostic Analysers.
Megger CSU600AT, 600 A Current Supply Unit, including Timer option. Current supply, 100 A @ 9.0 V 1 h, 600 A @ 6.5 V 30 s.
Four pole soil resistivity testing kit. IP54 rated, 2, 3 and 4 point testing. Selectable 25 V or 50 V output, complete with lead and stak..
The instrument offers a wide measurement range of 0.01O to 200kO, ground noise voltage measurement from 1 V to 100 V and ground current f..
Megger Digital Low Resistance Ohmmeter 10A/0.1microohm-2KOhm Self contained automatic micro-ohm meter, selecting the most suitable test cu..
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resist..
For Megger DLRO digital micro-ohm meters, potential spike lead set 2 x 2m long & current clip lead set 2 x 2m. These are used to sepa..
For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wi..
Test current range 10A to 200Adc. Measurement range 0.1micro-Ohm to 1Ohm, resolution 0.1micro-Ohm. Current cables 2 x 5m. Internal memory..
Megger EZ-Thump 12 kV Hipot tester, TDR and Thumper. This unit is designed as a portable cable fault finder. It operates off either ac su..
The IDAX 300 provides an accurate and reliable condition assessment of insulation in transformers, bushings, generators, and cables. It u..
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to..
Measures to 20 Tohm at 10 kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible whi..
15 kV dc Insulation Resistance Tester. Measures to 30 Tohm at 15 kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rap..
Light and compact 50V to 5,000V insulation resistance tester. Measures up to 10 Tera ohms. Diagnostic testing and maintenance of high vol..
The Megger MOM2 is a lightweight (1 kg), handheld micro-ohmmeter. Up to 220 A test current, auto ranging from 999 µohm to 1000 mohm fs. R..
The MTO330 delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time by testing all six win..
Test voltage 80kV max at 61.8Hz. Fully automatic operation. Rechargeable batteries. RS232C interface.
Portable Appliance Tester. Battery operated. This instrument does the full range of PAT tests required. Includes 10 mA & 30 mA portabl..
Megger PAT420 portable Appliance Tester. Tests to AS3760. Stores data on USB memory stick. Includes a barcode scanner and label printer.
Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. 3ph safe. Enables testing on 110V centre tapped..
High output current 5mA for fast charging of capacitive loads. Testing up to 10kV, mains or battery powered, digital/analogue backlit disp..
High output current 5mA for fast charging of capacitive loads. Testing up to 5kV, mains or battery powered, digital/analogue backlit disp..
Relay test set for 1 ph protective relay equipment. Three phase relay can be tested 1 ph at a time or by synchronising more than one unit..
The Megger TDR2000-3P is a dual channel TDR Cable Fault Locator. This instrument has user selectable ranges from 0 to 50 m up to 20 km and a..
Time Domain Reflectometer cable fault locator. User selectable ranges from 0 to 50m up to 20km, minimum resolution 0.1m. Dual cursor meas..