Checkout using your account
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.
Checkout as a new customer
Creating an account has many benefits:
This video demonstrates how to use the Proceq GPR Live to conduct an area scan to locate reinforcement in concrete. Portable ground penetrating radar (GPR) for concrete testing. Conducts wide frequency spectrum measurement with Line and Area scan modes.
Covers how to turn on the Testo 417 Vane Anemometer and how to setup and conduct tests. The Testo Vane Anemometer has a 100 mm head and displays velocity and temperature. The unit has an averaging function to measure ducts, and a range of 0.3 to 20 m/s ±(0.1m/s + 1.5% mv) and a temperature range 0 to 50°C ±(0.5°C). 50 h battery life.
A short video on how to conduct a crack depth test using the Proceq Pundit PL-200PE Ultrasonic Concrete Test System. This includes dimension B and 2B, placement of transducers, and using manual and auto mode to find the sine wave.
The Hilti PS1000 X-scan is a GPR system with 3 transmitters and 5 receivers that has been designed to provide a 3D image of the location of reinforcement bars and other metallic and non-metallic objects in concrete. The unit is accurate to ±10 mm and will measure to a depth of 300 mm, using both Quickscan and Imagescan functionality.
Easily conduct Non-Destructive Testing (NDT) of concrete structures for their compressive strength. Using a rebound hammer, the Schmidt family have full integrated concrete hammers using standard and low impact energy. This includes a range of software and add-ons to give greater detail.
A tutorial for operation of the Resipod resitivity meter and ResipodLink software.
This is a video that describes how to operate the Hilti PS200 Ferroscan. This is a portable, quick and easy to use concrete cover meter for detecting rebar and other ferrous objects in concrete structures.
Kit includes a generator with touch button controls, LCD display and an XD receiver/locator operating at 33kHz. Operates in power or radio modes.
In this video we demonstrate how the Honeywell Air Transmission Monitor can be used to monitor CO2 levels within a room, which can indicate the quality of air ventilation. This product can be used to assess the risk of transmitting viruses (eg. COVID-19) within areas such as office spaces, so that action can be taken to improve the quality of air ventilation. If ventilation cannot be improved TechRentals also offer a product called the InovaAir DE20-PLUS, which is a medical grade HEPA filter which can assist in removing viruses, bacteria, dust, allergens…etc from the air.
This video is a quick overview of the ALNOR EBT731 Balometer Electronic Balancing Tool.
This video is a brief introduction to the BW Clip4 personal gas detector. In this video we also demonstrate how to perform a bump test and place the device in travel mode. The Clip4 is just one of the gas monitoring products available from TechRentals.
This video demonstrates how to set-up / sync Profound Vibra alarms.
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.