Fluke

Fluke 1524 NATA Precision Handheld Thermometer

Fluke 1524 NATA Precision Handheld Thermometer

Precision portable, electronic thermometer with trending, memory for logging 15,000 data and time stamped measurements and 25 readings with ..

Fluke 1587 Insulation Multimeter

Fluke 1587 Insulation Multimeter

The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..

FLUKE 1625 KIT GEO Earth Ground Tester

FLUKE 1625 KIT GEO Earth Ground Tester

Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..

FLUKE 1630 Earth Ground Clamp

FLUKE 1630 Earth Ground Clamp

Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground le..

Fluke 1653B Multifunction Installation Tester

Fluke 1653B Multifunction Installation Tester

The Fluke 1653B Installation Tester verifies the safety of electrical installations in domestic, commercial, and industrial applications...

Fluke 1663 FVF Installation Tester

Fluke 1663 FVF Installation Tester

Fluke 1663 Installation Tester. Provides the foillowing tests Continuity test under 200mA, Loop Impedence without triggering an RCD can be s..

Fluke 1738 Power & Energy Logger

Fluke 1738 Power & Energy Logger

Fluke 3 phase power logger with Fluke connect mobile app. Includes 4x 1500 amp flex probes (1 A to 150 A . 1 A resolution 30 mA accuracy)..

Fluke 200 MHz 4 CH ScopeMeter with DMM 190-204/S

Fluke 200 MHz 4 CH ScopeMeter with DMM 190-204/S

Fluke 200 MHz 2.5 GS/s (1.25 GS/s 4ch), 4 channel digital oscilloscope with DMM. Features Persistence mode, Connect-and-View triggering f..

Fluke 2042 Cable Locator

Fluke 2042 Cable Locator

Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuit..

Fluke 233 Digital Multimeter with Remote Display

Fluke 233 Digital Multimeter with Remote Display

The Fluke 233 is a digital multimeter with a remote display. The removable display has a range of 10 m, allowing the user flexibility when t..

Fluke 28II EX Intrinsically Safe True-RMS Multimeter

Fluke 28II EX Intrinsically Safe True-RMS Multimeter

Fluke 28II Ex Intrinsically Safe Multimeter is a completely sealed IP67 rated case.  For use inside and outside of hazardous zones. ..

Fluke 345 mbar Pressure Transducer and Pump

Fluke 345 mbar Pressure Transducer and Pump

Fluke-700PD3 dual pressure module, range ±350 mbar differential or gage, reference uncertainty 0.04%, connection 1/4 NPT. Suitable for us..

Fluke 345 Power Quality Clamp Meter

Fluke 345 Power Quality Clamp Meter

Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and hig..

Fluke 376 True-rms AC/DC Clamp Meter with iFlex

Fluke 376 True-rms AC/DC Clamp Meter with iFlex

Fluke 376 True-RMS 2500A AC & 1000A DC Clamp meter, includes a flexible current probe. will record Min Max and Average. Measure AC vo..

Fluke 435 3-Phase Power Quality & Energy Analyser...

Fluke 435 3-Phase Power Quality & Energy Analyser...

Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides..

Fluke 481 Radiation Survey Meter

Fluke 481 Radiation Survey Meter

Fluke 481 radiation monitor. Provides exposure measurements in mR/hr to 50 R/h (0.5 Sv/hr). Detects skin-dose, deep-dose and X-ray radiat..

Fluke 54-2B 2Ch Data Logging Temperature Meter w Flukeview

Fluke 54-2B 2Ch Data Logging Temperature Meter w Flukeview

Fluke 54 series 2 dual input digital thermometer with data logging. Will take most TC inputs. Accuracy +/-0.05% of reading +0.3 degreeC. ..

FLUKE 5500A CALIBRATOR

FLUKE 5500A CALIBRATOR

Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo..

Fluke 5500A Multi Product Calibrator with NATA calibration

Fluke 5500A Multi Product Calibrator with NATA calibration

Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous v..

Fluke 572-2 High Temperature Infrared Thermometer

Fluke 572-2 High Temperature Infrared Thermometer

Temperature measurement range from -30 to 900°C. with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accur..

Fluke 690bar Pressure Transducer & Pump suit Fluke 744 & 725

Fluke 690bar Pressure Transducer & Pump suit Fluke 744 & 725

For use with the Fluke 744 & 725 industrial calibrators. Range 0 to 690 bar, reference uncertainty .025%. Connection 1/4NPT and 1/4 I..

Fluke 7 bar Pressure Transducer & Pump suit Fluke 744 & 725

Fluke 7 bar Pressure Transducer & Pump suit Fluke 744 & 725

For use with the Fluke 744 & 725 industrial calibrators. Range 100 to 690kPa, reference uncertainty .025%. Connection 1/4NPT and 1/4 ..

Fluke 70 bar Pressure Transducer & Pump suit Fluke 744 & 725

Fluke 70 bar Pressure Transducer & Pump suit Fluke 744 & 725

For use with the Fluke 744 & 725 industrial calibrators. Pneumatic system range 0 to 70Bar, resolution 7mBar, reference uncertainty 0..

Fluke 725 NATA Process Calibrator with NATA Certification

Fluke 725 NATA Process Calibrator with NATA Certification

DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..

Fluke 725 Process Calibrator

Fluke 725 Process Calibrator

Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..

Fluke 726 Process Calibrator

Fluke 726 Process Calibrator

Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..

Fluke 726 Process Calibrator with NATA Certification

Fluke 726 Process Calibrator with NATA Certification

The Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, ..

Fluke 753 Documenting Process Calibrator

Fluke 753 Documenting Process Calibrator

Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..

Fluke 754 Documenting Process Calibrator with HART

Fluke 754 Documenting Process Calibrator with HART

Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..

Fluke 773 Milliamp Process Clamp Meter

Fluke 773 Milliamp Process Clamp Meter

Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..

Fluke 789 ProcessMeter

Fluke 789 ProcessMeter

Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250 resistor, 20mA drive into 1,200..

Fluke 80i-110s ac/dc Current Probe

Fluke 80i-110s ac/dc Current Probe

The Fluke 80i-110s ac/dc current clamp is designed for oscilloscopes that uses a Hall effect cell for the measurement of dc or ac current..

Fluke 810 Vibration Tester

Fluke 810 Vibration Tester

Tests rotating machinery to determine the status of gearing wear etc. Used to: Troubleshoot equipment and understand cause of failure. Co..

Fluke 87-5 Industrial True-RMS Multimeter With Thermometer

Fluke 87-5 Industrial True-RMS Multimeter With Thermometer

Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurem..

Fluke 90I-610S 1 A to 600 A ac/dc Current Probe

Fluke 90I-610S 1 A to 600 A ac/dc Current Probe

Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..

Fluke 9103 Dry Block Temp Calibrator -25 to 140°C

Fluke 9103 Dry Block Temp Calibrator -25 to 140°C

Fluke Metrology dry well calibrator, temperature range -25 to 140°C. The 9103 is stable to ±0.02 °C, and its display is calibrated to an ..

Fluke 9150 Thermocouple Furnace 150 to 1,200°C NATA Cert

Fluke 9150 Thermocouple Furnace 150 to 1,200°C NATA Cert

Fluke 9150 Thermocouple Furnace NATA certified.  Temperature range 150 to 1,200°C. Stability ±0.5°C, display accuracy of ±5°C across..

Fluke 9170 Dry Block Temp Calibrator -45 to 140°C

Fluke 9170 Dry Block Temp Calibrator -45 to 140°C

Fluke Metrology dry well calibrator temperature range -45 to 140°C. Display accuracy ±0.1°C, stability ±0.005°C full range, resolution 0.0..

Fluke 975 AirMeter Indoor Air Quality Monitor

Fluke 975 AirMeter Indoor Air Quality Monitor

Indoor air quality (IAQ) monitoring, measure temperature, humidity, CO and CO2 concentrations. Humidity range 10 to 90%, temperature rang..

Fluke CertiFiber Pro MM Optical Loss Test Set

Fluke CertiFiber Pro MM Optical Loss Test Set

Fluke multimode (CFP-MM-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850 and 1300 nm in 3..

Fluke CertiFiber Pro MM-SM Optical Loss Test Set

Fluke CertiFiber Pro MM-SM Optical Loss Test Set

Fluke multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 13..

Fluke CertiFiber Pro SM Optical Loss Test Set

Fluke CertiFiber Pro SM Optical Loss Test Set

Fluke CFP-SM optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 1310 and 1550 nm in 3 s. A set refer..

Fluke DSX-5000 + Optifber Pro Q + CFP Q

Fluke DSX-5000 + Optifber Pro Q + CFP Q

The Fluke DSX-5000QOi contains the DSX-5000 copper analyser, CertiFiber Pro OLTS quad wavelength, Optifiber Pro OTDR quad wavelength, and..

Fluke DSX-5000 Cable Analyser 1 GHz Class FA

Fluke DSX-5000 Cable Analyser 1 GHz Class FA

The Fluke DSX-5000 1 GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE ..

Fluke DSX-8000 + Optifber Pro Q + CFP Q

Fluke DSX-8000 + Optifber Pro Q + CFP Q

The Fluke DSX-8000QOi contains the DSX-8000 copper analyser, CertiFiber Pro OLTS quad wavelength, Optifiber Pro OTDR quad wavelength and a U..

Fluke DSX-8000 Cable Analyser 2GHz Class FA

Fluke DSX-8000 Cable Analyser 2GHz Class FA

Fluke DSX-8000 2GHZ cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 40 GigE deployme..

Fluke FI-7000 FiberInspector Pro Video Probe

Fluke FI-7000 FiberInspector Pro Video Probe

The FI-7000 FiberInspector Pro is a fiber optic inspection scope that allows you to inspect and certify fiber optic connector end-faces in..

Fluke FTK1000 Multimode Fibre Optic Light Source and Meter

Fluke FTK1000 Multimode Fibre Optic Light Source and Meter

Fluke SimpliFiber FTK1000 fibre test kit. Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550n..

Fluke i5sPQ3 ac Current Clamps, 5 A (3 x i5S per set)

Fluke i5sPQ3 ac Current Clamps, 5 A (3 x i5S per set)

A pack of 3 pieces of the i5s 5 A ac current clamps, specially configured to provide low current accuracy while taking measurements on se..

Fluke Networks FI-1000 FiberInspector Kit

Fluke Networks FI-1000 FiberInspector Kit

The FI-1000 FiberInspector kit enables you to quickly inspect and certify fibre end-faces inside ports or patch cords. It's 2-second autom..

Fluke Optifiber Pro Quad OTDR

Fluke Optifiber Pro Quad OTDR

Fluke Optifiber Pro Quad multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm, dynamic range 28, 30, 32 and 30 dB respectively...

Fluke Pneumatic Pressure Calibrator

Fluke Pneumatic Pressure Calibrator

Fluke P5510-2700G Pneumatic Calibrator and 20 bar (300 psi) gauge. ..

Fluke Ti400 High Temperature Infrared Thermal Image Camera

Fluke Ti400 High Temperature Infrared Thermal Image Camera

The Fluke Ti400 infrared thermal imaging camera can record AVI video, and is suitable for almost any application such as electrical surve..

Fluke TiS55 Infrared Camera

Fluke TiS55 Infrared Camera

Temperature range -20 to 450°C, resolution 220 x 165, 9 Hz refresh, NETD 80 mK. IR-Fusion technology, manual focus, sighting laser and in..

Fluke VR1710 Single-Phase Voltage Quality Recorder

Fluke VR1710 Single-Phase Voltage Quality Recorder

Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1 s..

Kit of Encircled Flux MM Test Reference Leads for the DSX-MM

Kit of Encircled Flux MM Test Reference Leads for the DSX-MM

Kit consists of Encircled Flux (EF) compliant test reference leads suitable for use with the Fluke CertiFiber Pro Optical Loss Test Set on t..

Kit of Encircled Flux MM Test Reference Leads for the DSX-MM

Kit of Encircled Flux MM Test Reference Leads for the DSX-MM

Kit consists of Encircled Flux (EF) compliant test reference leads for the following fibre networks:  - SC, ST 62.5 um (OM1 &..

Showing 1 to 57 of 57 (1 Pages)