Your cart is empty!
Rent short or long term Electrical Power testing equipment to suit a range of industry measurements. If you do not see what you are looking for please call our technical sales team who will assist you with your enquiry.
The ALL-TEST5PRO is a comprehensive electrical motor circuit analyser designed for stand alone troubleshooting, and QA of stored new or r..
Weatherproof compact power analyzer & logger. Certified to IEC61000-4-30, Class A. Includes WiFi and mobile interfaces and GPS time sync..
Multi-function Partial Discharge (PD) Instrument. It measures accurate PD activity using the UltraTEV detector and an ultrasonic detector. ..
Set of 4 x a-6A Mini Clamps suitable for Elspec G4500 unit..
Portable PQA with GPS receiver to to measure, store & analyze (continuously) waveform signals. Includes G4500 with 4x 3000A Flexible Cur..
The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter. Insutation: M..
Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil res..
Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025ohm to 1.5KOhm. Ground l..
Fluke 1663 Installation Tester. Provides the foillowing tests Continuity test under 200mA, Loop Impedence without triggering an RCD can be s..
Fluke 3 phase power logger with Fluke connect mobile app. Includes 4x 1500 amp flex probes (1 A to 150 A . 1 A resolution 30 mA accuracy)..
Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short-circuit..
Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and hig..
Fluke 376 True-RMS 2500A AC & 1000A DC Clamp meter, includes a flexible current probe. will record Min Max and Average. Measure AC vo..
Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides..
Power Quality Analyser function to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator ..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
A pack of 3 pieces of the i5s 5 A ac current clamps, specially configured to provide low current accuracy while taking measurements on se..
Fluke MDA-550 is a Motor drive analyzer designed to monitor and troubleshoot VFD (or VSD) motor systems. Features 4 channels, measurement to..
Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1 s..
Portable (16kg control unit, 39kg HV tank) hipot tester, 100kV, 50Hz, rated 3kVA into capacitive loads. Features continuously adjustable ..
Single, portable (34kg) unit suited for testing overhead apparatus, vacuum bottles and interrupters, switch gear, bus duct, motorized vac..
The PFT301CM is a portable HiPot 0 to 30 kV ac 1 kV A resistive/capacitive load: 33 mA. Duty cycle at 1 kV A 1 h on, 1 h off 700 V A Cont..
Takes on-the-spot measurements of the internal resistance, voltage and temperature of lead-acid batteries, principally for UPS and simila..
Rated primary current 5A AC. Amplitude accuracy +/-0.5% rdg. +/-0.2% fs (at 45 to 66Hz), 66Hz to 5kHz +/-1% or less. Max circuit voltage ..
Takes on-the-spot measurements of the internal resistance,and voltage of lead-acid batteries, for UPS and similar applications, without taki..
Hioki PW3360-21 power logger supports single to three phase 4 wire circuits. Supplied with 3x 500 A CTs 5/10/50/100/500 A ranges 0.3% rdg..
Premium Power Quality Analyzer in accordance with the IEC61000-4-30 Class A standard for demanding applications. Includes 4 x CT7045 6000A A..
Premium Power Quality Analyser for demanding applications. Includes 3 x 1000A ac CTs and 1 x 200A ac/dc CT. Ideal for ac mains studies as..
Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for..
The HT Solar I-VE Tester is a multifunction device for testing maintenance of single phase solar installations. This system will verify the ..
Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cabl..
Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cables,..
VLF(0.1Hz), DC(+/-), cable fault conditioning (burning), and sheath/jacket testing mode all included. 0.1Hz & 0.02Hz. For solid diele..
VLF and DC test capabilities combined in one unit (60 kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear,..
VLF, DC and Jacket/Sheath testing. Sinusoidal: 0 - 94 kV peak, 0 - 66 kV rmsDC: ± 0 - 90 kV and Squarewave: 90 kV. The high power HVA94 Test..
Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail ..
Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12 V to 480 V battery systems and can..
The Megger MWA330A Winding Resistance Analyser combines TTR and resistance testing in a single unit. It performs the following tests: three-..
Provides reliable cable identification for both energised and non-energised cables. It can generate pulses on 440 V 3 phase cables.
Megger Digital Low Resistance Ohmmeter 10A/0.1microohm-2KOhm Self contained automatic micro-ohm meter, selecting the most suitable test cu..
Measures resistance between 0.1 micro-Ohms and 1Ohm, at high currents. Provides test currents from 10A to 600A subject to the load resist..
For Megger DLRO digital micro-ohm meters, potential spike lead set 2 x 2m long & current clip lead set 2 x 2m. These are used to sepa..
For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wi..
Megger DLRO100XB - 100A lightweight, mains and battery operated digital low resistance ohmmeter. Unit is supplied with 5m kelvin lead set, D..
Simple rotary switch selection of five test modes, including auto start on connection.The unit is powered from either its rechargeable batte..
Test current range 10A to 200Adc. Measurement range 0.1micro-Ohm to 1Ohm, resolution 0.1micro-Ohm. Current cables 2 x 5m. Internal memory..
Megger EZ-Thump 12 kV Hipot tester, TDR and Thumper. This unit is designed as a portable cable fault finder. It operates off either ac su..
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to..
The Megger MIT1025 is a 10 kV Insulation Resistance Tester (IRT) capable of resistance measurements up to 20 Tohm. Testing options include P..
15 kV dc Insulation Resistance Tester. Measures to 30 Tohm at 15 kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rap..
Light and compact 50V to 5,000V insulation resistance tester. Measures up to 10 Tera ohms. Diagnostic testing and maintenance of high vol..
The Megger MOM2 is a lightweight (1 kg), handheld micro-ohmmeter. Up to 220 A test current, auto ranging from 999 µohm to 1000 mohm fs. R..
Test voltage 80kV max at 61.8Hz. Fully automatic operation. Rechargeable batteries. RS232C interface.
Portable Appliance Tester. Battery operated. This instrument does the full range of PAT tests required. Includes 10 mA & 30 mA portabl..
Megger PAT420 portable Appliance Tester. Tests to AS3760. Stores data on USB memory stick. Includes a barcode scanner and label printer.
Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. 3ph safe. Enables testing on 110V centre tapped..
Relay test set for 1ph protective relay equipment. Three phase relays can be tested 1ph at a time or by synchronising more than one unit...
The Megger TDR2000-3P is a dual channel TDR Cable Fault Locator. This instrument has user selectable ranges from 0 to 50 m up to 20 km and a..
Time Domain Reflectometer cable fault locator. User selectable ranges from 0 to 50m up to 20km, minimum resolution 0.1m. Dual cursor meas..
Battery discharge load unit. Works with 7.5V to 500V battery systems and can discharge at up to 220A (15kW maximum power). It can be program..