Your cart is empty!
Search in product descriptions
Magnetic measuring equipment, portable gaussmeter. Built-in software eliminates the need for complex calibration procedures. Key features..
Aeroqual Dust Sentry Profiler Outdoor dust monitor. This will monitor data and store the information in the cloud. This instrument will log ..
The EBT731 Balometer Electronic Balancing Tool features a detachable multi-purpose digital manometer that can be used with the following ..
Anritsu MS2712E portable hand held spectrum analyser 9 kHz to 4 GHz, DANL -162 dBm in 1 Hz RBW, RBW 1 Hz to 3 MHz. Tracking generator -50 ..
The TK-3 Proximity System Test simulates shaft vibration and position for calibrating proximity probes. The TK-3 uses a removable spindle mi..
Analog inputs 32 isolated and 48 single ended inputs. 2x 4 digital input types. 2x serial sensor ports, Modbus capability, , 4x SDI12 cha..
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range 0 - 350 bar (5000 psi) +/- 0.005% FS. Voltage inpu..
Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous vo..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Documenting process calibrator. DC voltage msmt. 0.025% 300 V max, source 0.02% 11 V max. DC current msmt. 0.025% 110 mA max, source 0.01..
Precision Multifunction Process Calibrator. DC voltage msmt. 0.010% 30 V max, source 0.010% 20 V max. DC current msmt. 0.010% 24 mA max, ..
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fluke 754 with HART offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, ..
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop. Capable of 0-20.99 mA and 24-100 mA..
Fluke 789 is both digital multimeter and a loop calibrator which has 2 to 20mA sink and source capability, including a 24V (Loop) supply. ..
Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device th..
Fluke multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 13..
Fluke Optifiber Pro Quad multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm, dynamic range 28, 30, 32 and 30 dB respectively...
Fluke SMFT-1000 Solar I-V Curve Tracer Pro Kit for PV installation, commissioning, inspection, and maintenance testing that conforms to IEC ..
Fluke Ti480 Pro thermal imaging camera, temperature range -10 to 1,000 degC, 640 x 480 thermal resolution (1280 x 960 with SuperResolution m..
Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100 deg C ..
Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC mode for waveform monitor output DC to 3MHz, AC mode detection of ..
Alpha, Beta, Gamma and X-ray radiation monitor. Meter, LED, audible indication and detachable probe. Range 0.1 to 1,000,000 CPM; Accuracy..
For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wi..
The Megger PD Scan is an on-line partial discharge (PD) handheld scanner for detecting defects in medium and high voltage systems. Used for ..
Optional accessory for the PRO,TORKEL-840 battery load unit. Adds up to an extra 112A load capacity to a discharge test (15.8kW maximum)...
Protection relay test set with six current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), four voltage outputs (4 x 300V or 1..
Protection relay test set with six current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), four voltage outputs (4 x 300V or 1 x ..
Equotip Live Ultrasonic Contact Impedance (UCI) hardness tester. Universal probe with adjustable test load between HV1 and HV10. Available..
Portable ground penetrating radar (GPR) for concrete testing. Conducts wide frequency spectrum measurement with Line and Area scan modes. Fe..
Rebar locator and covermeter. Short range measurements to 95mm. +/- 3mm accuracy. Long range 185cm accuracy +/-4mm. The unit will determi..
PL-200PE ultrasonic concrete test system. This system can determine depth of perpendicular cracks, slab thickness from a single side and ..
Can determine the likelihood of corrosion and the corrosion rate in concrete. 0 to 1,000 kOhm measurement range. USB interface, USB charg..
The Profound VIBRA+ with Cloud is designed for long-term ground vibration logging. It is ideal for applications in the construction industry..
The Protimeter Moisture Measurement System is used for detection of moisture in non-conductive solid materials such as wood and masonry. The..
Moisture meter for detection of moisture in non conductive solid materials such as wood and masonry. Two measurement modes, search for qu..
The PROFIBUS Tester 5 (BC-700-PB) is a powerful diagnostic and troubleshooting tool for testing cables, measuring signals and analysing the ..
