Your cart is empty!
Fluke 789 is both digital multimeter and a loop calibrator which has 2 to 20mA sink and source capability, including a 24V (Loop) supply. HART 250 resistor, 20mA drive into 1,200. Simultaneous mA and % of scale readout on mA output. 25% manual step plus auto step and auto ramp on mA output. Min/max/average/hold/relative modes. Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA DC 0.05% +2, frequency 0.005% +1.
Fluke 753 calibrators provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate ..
Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. 0 to 70 bar, accu..
Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes:- 1/4"BSP & NPT; 1/8"BSP & NPT; 3/8"BSP &..
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resist..
Tags: fluke 789, fluke 789 process meter, process meter, multimeter
